Products
SWS–2000
The SWS-2000 System is controlled via a powerful software program capable of integrating the synchronized operation of the five axis Servo System which drives the winder, pay-on head, height adjust, accumulator and the servo-driven former expand/collapse feature. Machine parameters are digitally monitored and controlled via a Programmable Logic Controller (PLC) and a menu driven touch screen so that at each stage the operator is guided to obtain the desired machine operation.
The SWS-2000 System consists of the following:
- A SWS-2000 Bead Winder, automatically producing two single wire beads per machine cycle. The winder is complete with a servo driven former assembly for precise speed and position control, a servo driven pay-on head, servo driven head height adjust assembly and a servo driven former expand/collapse feature. The SWS-2000 uses an adjustable radially expanding former design which automatically deposits the finished beads into an optional bead chute or handling system.
- A Serpentine Festoon that is servo driven. The position and speed of the festoon is precisely controlled by the system PLC/Servo system to match the winder speed. The festoon design allows for independent speeds of each of the two wire paths.
- A Bartell/RMS Cold Feed Plastiscrew Extruder complete with Temperature control Units and a Bartell insulating head.
- Let-Off Equipment consisting of two Heavy Duty Let-Off Stands, a two-station gathering rail and a guide roll stand.
- Integrated Control System, including PLC and Servo system drives and motors, for automatic control of the process
- Operator Interface Terminal containing menu screens, run screens, manual screens and diagnostic screens.
- We strongly recommend as original equipment, electrically interlocked perimeter guarding designed and integrated by Bartell.
| Feature | Benefit |
|---|---|
|
Single Operator Control |
Minimal Manpower Requirement |
|
Hexagonal Section Beads |
Product Flexibility |
|
Integrated Line Control |
Controlled Process |
|
Multi Bead Recipe Storage |
Reduced Downtime |
|
Automatic Unload |
Continuous Production |
|
Simple Machine Set-up |
Reduced Downtime |
|
Radial Expand Former |
Multi Size Bead Diameters |
|
System Diagnostics |
Reduced Downtime |
|
Multi Bead Productivity |
Reduced Bead Cost |
|
Precision Wire Pre-Cast System |
Improved Product Quality |
BEAD PARAMETERS
Bead ID: 13.00 – 25.00” (330 – 635 mm)
Bead Width: 1.3125” (33.3 mm)
Bead Height: 0.75” (19 mm)
Bead Base Angle: 0 Deg – 15 Deg
BEAD CONSTRUCTION
Diameter Adjustment: + / – 0.125”
Shape: Hexagonal, square, offset
Cross-over: Single or multiple point
PRODUCTION CAPABILITIES
Beads per cycle: Two (2)
Line Speed: 1,000 ft/minute (304 m/minute)
Productivity:
15” (381mm) 10-turn @ 10.6 beads/minute
15” (381mm) 10-turn @ 5,088 beads/8 hour shift
22.5” (571.5mm) 72-Turn @ 4 beads/minute
22.5” (571.5mm) 72-Turn @ 1,920 beads/8 hour shift