Pad Style Taping Heads
Two (2) or Four (4) Pad Taping Heads are suitable for the simultaneous application of two (2) or four (4) tapes onto a pipe surface in a layered spiral form with an open helix configuration. A heavy duty fabricated steel frame supports the rotating head assembly and the bore through the main frame is sized to allow a maximum passage of 600mm. A large lubricated bearing is mounted on the stationary portion of the main frame to create a rotating faceplate and a separate roller on a spring loaded swinging arm rides on the outside diameter of the tape pad to maintain constant tape tension during the run.
Maximum Tape Package Diameter: 1000 mm
Minimum Tape Width: 65 mm
Maximum Tape Width: 150 mm
Minimum Tape Thickness: 0.15 mm
Maximum Tape Thickness: 0.75 mm
Tape Package Bore ID: 76.2 mm – 152.4 mm
Maximum Tape Package Weight: 90 Kg
Maximum Tape Tension: 100 daN
Pitch Range: 65 mm – 300 mm
Minimum Center Passage: 75 mm
Maximum Center Passage: 550 mm
Lay Angle: ± 30°
Maximum Rotational Speed: 60 RPM (balanced load)